GE CTF878, Programming Manual

Page: 55 / 116

Displaying and Configuring Data 2-7
February 2009
Specifying the Number of
Displayed Parameters
As mentioned earlier, the CTF878 can display one to four different
measurement parameters simultaneously. However, sometimes you
might wish to display only one or two parameters. To change the
number of open display windows from within the Site Menu (shown
in Figure 2-6 on page 2-6), use the [
T
]or [
S
] arrow keys to move to
the desired number of views (1 View, 2 Views, etc.). Press
[ENTER]
.
The screen displays the designated number of windows. For
example, Figure 2-7 below shows the screen displayed in Figure 2-3
on page 2-3, reconfigured for a single view.
Figure 2-7: Display Screen Configured for Single View
Note:
The CTF878 opens display windows from left to right and
from top to bottom, starting from the upper left; that is, if you
press “1 View,” the parameter displayed in the upper left
window appears. If you press “2 Views,” the parameters
shown in the two top windows appear. The view for “3 Views”
adds the window in the lower left, and that for “4 Views” adds
the window in the lower right.
-10000
10 Minutes
10000
0
-5000
-2000
2000
5000
Save Now
Program Meter Logging Service
Velocity, m/s
Site