GE CSWDMBLBWF1NN Installation Manual Download

Page: 2 / 13

WARNING: RISK OF ELECTRIC SHOCK

This product installation requires handling 120 volt wiring.

Follow each step carefully.

If you have any concerns handling wiring, hire a qualified

electrician. Ensure all work meets local and federal

regulations.

WARNING - This control must be installed with an external

isolating wall control/switch in series with the ungrounded

conductor, providing an air gap as per National Electrical

Code (NEC) ANSI/NFPA 70 article 404, and Canadian

Electric Code, Part 1 (CEC)

Simple DIY Set Up

STEP 1

Install your Smart Switch

STEP 2

Download the Cync App, powered by Savant,

on your smartphone

STEP 3

Add your Smart Switch to the Cync App

For set up help, visit gelighting.com/cync

GE and C by GE are trademarks of General Electric Company. Used under trademark license.

Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

Google and other related marks and logos are trademarks of Google LLC.

Summary of Contents for CSWDMBLBWF1NN














Search results

Summary of Contents for CSWDMBLBWF1NN

Reviews:

Related manuals for CSWDMBLBWF1NN

Brands by name

Popular brands

GE CSWDMBLBWF1NN, Installation Manual

Search results

Summary of Contents for CSWDMBLBWF1NN

Reviews:

Related manuals for CSWDMBLBWF1NN

Brands by name

Popular brands