background image

© 2010 GE Intelligent Platforms Embedded 

Systems, Inc. All rights reserved.

* indicates a trademark of GE Intelligent 

Platforms, Inc. and/or its affiliates.  All other 

trademarks are the property of their respective 

owners.

Confidential Information - This document 

contains Confidential/Proprietary Information 

of GE Intelligent Platforms, Inc. and/or its 

suppliers or vendors.  Distribution or 

reproduction prohibited without permission.

THIS DOCUMENT AND ITS CONTENTS ARE 

PROVIDED "AS IS", WITH NO REPRESENTATIONS 

OR WARRANTIES OF ANY KIND, WHETHER 

EXPRESS OR IMPLIED, INCLUDING BUT NOT 

LIMITED TO WARRANTIES OF DESIGN, 

MERCHANTABILITY, OR FITNESS FOR A 

PARTICULAR PURPOSE.  ALL OTHER LIABILITY 

ARISING FROM RELIANCE UPON ANY 

INFORMATION CONTAINED HEREIN IS 

EXPRESSLY DISCLAIMED.

GE Intelligent Platforms 
Information Centers

Americas:

1 800 322 3616 or 1 256 880 0444

Asia Pacific:

86 10 6561 1561

Europe, Middle East and Africa:

Germany

+49 821 5034-0

UK

+44 1327 359444

Additional Resources

For more information, please visit

 

the GE Intelligent Platforms Embedded 
Systems web site at:

www.ge-ip.com

Publication No. 522-807055-000 Rev. D

Summary of Contents for CompactPCI VMIACC-7055 Series
























Reviews: