GE CFE29TS, Manual

Page: 70 / 82

70
FZ
Display
FF
Display
Mode Comments
00 00 Get F Codes See F Code Section
00 01 Clear F Codes
Clears all the stored codes by pressing GO (LCD
models) or any other button on (LED models) other
than temperature.
00 02 Dispenser Self-Test Mode
Turns on all LEDs and 7 Segments on the Dispenser board for
testing.
00 06 COM Version Return the Com Version (Only on LCD Models)
00 07 Degrees C Mode Changes the System to be Degrees C
00 08 Degrees F Mode Changes the System to be Degrees F
00 11 Join Zigbee
™ Network
Join a energy management Network
00 12 Leave Zigbee
™ Network
Leave a energy management Network
00 13 Get Zigbee
™ Network Status
Check the energy management Network status
00 14 Force FF and FZ Defrost Starts a FF and FZ defrost
00 15 Exits All Defrost Forces the Heated Defrost to the Idle State
00 16 Exit All Tests Resets all boards in the system
Once in diagnostic mode with ZEROS in the temperature displays, press “GO” on
(LCD models) or any other button, other than temperature setting, (LED models) to
retrieve any stored error codes.
To scroll through failure codes, press the Up arrow for the FF temperature adjustment.
To return to previously displayed failure code, press the down arrow for the FF temperature
adjustment. FF controls are on the right of the display.
Service Diagnostics Failure Codes