– 31 –
4. Remove four T25 Torx screws (two each
side) that secure the inner door to the hinge
assemblies.
5. Slide the inner panel toward the top and the
outer panel to the bottom to disengage the
attachment strips. NOTE: The hinges are
secured to the outer door panel.
6. The attach strips will disengage from the outer
panel.
7. Support the vent conduit while lifting the inner
door from the outer door panel.
The inner door vent cover must be removed to
remove the power vent conduit and fan. Insert two
SRFNHWVW\OHÀDWEODGHVFUHZGULYHUVLQWRWKHYHQW
then turn counter-clockwise to remove.
To Separate the Door
1. Remove the door.
2. Place the door with the outer door facing down
on a protective surface.
3. Remove two 1/4 in. hex head screws inside the
bottom of the door.
Inner Door Vent Cover
(
Continued next page
)
Protective Surface
