49-5000421 Rev. 0
11
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
3. PREPARE THE AIR
CONDITIONER
A.
Install the top mounting rail with 3/8” screws;
from the outside of the case.
B.
Apply the weather seals provided to the bottom,
of the window to the seal bottom of the air
conditioner.
C.
Slide the side curtain panels into the side panel
rails.
D.
Slide left and right side curtain frames into top
and bottom rails. Make
sure that side curtains snap into side of the
frames.
1. WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to modify
them for other types of windows.
• The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of the
power cord.
• Follow the dimensions in the table and
illustration for your model.
2. STORM WINDOW
REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly. To adjust for this,
attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2
Ǝ
LENGTH:
Long enough to fit inside the window
frame.
THICKNESS:
To determine the thickness,
SODFHDSLHFHRIZRRGRQWKHVLOOWRPDNHLWƎ
higher than the top of the storm window frame
or the vinyl frame.
Attach securely with nails or screws provided
by the installer.
(With side curtain panels)
24”- 36”
14 1/2”
ƎKLJKHU
than storm
window
frame
Storm window
frame
Wood
Sill
ƎKLJKHU
than vinyl frame
(on some windows)
Vinyl frame
Top mounting rail
Bottom mounting rail
CLICK
Cut and apply
weather strip to
back edge of
the window sill.
Summary of Contents for Carry-Cool ATM06
Page 16: ...16 49 5000421 Rev 0 Notes NOTES ...
Page 34: ... 49 5000421 Rev 0 Notas NOTAS ...
