15
Installation Instructions
STEP 5 LEVEL UNIT
All models have 4-point leveling. The front is supported
by leveling legs; the rear is supported by adjustable
wheels. Both are accessible from the front of the unit.
• To level the back of the unit, turn the 7/16" hex nut
located above the front wheels. Turn clockwise
to raise or counterclockwise to lower the unit.
• For front leveling, use a 1-1/4" open-end wrench.
• Adjust height of unit to match installation cutout
opening 83-1/2 to 84-1/2". The unit should be level
and plumb with cabinetry.
Leveling Leg
Hex Nut Adjusts
Rear Wheels
CAUTION:
The rear leveling wheels and front leveling legs
are limited to a maximum height adjustment of 1".
If the installation requires more than 84-1/2" height,
the installer should elevate the unit on a sheet
of plywood or runners. Cabinetry trim could also
be added across the top of the opening to shorten
the opening.
If you attempt to raise the unit more
than 1", you will damage the front leveling legs
and the rear leveling wheels.
PRUDENCE
Les roues de nivellement arrière et les pattes de
nivellement avant permettent un réglage maximal
de 25 mm (1 po). Si l’ouverture pour l’appareil
ménager a une hauteur supérieure à 2,15 m
(84-1/2 po), l’installateur doit élever l’appareil ménager
sur une feuille de contre-plaqué ou des glissières.
Il est également possible d’ajouter des baguettes
de finition des placards sur le haut de l’ouverture
afin de la réduire. Lever l’appareil ménager de plus
de 25 mm (1 po) endommage les pattes de nivellement
avant et les roues de nivellement arrière.
