42
• Control Keypad
4.7.9
COMM. Parameters
– Page 8 – With the Modbus standard PCB
Function &
Default
Range
Unit
Description
COMM.Protocol
Modbus
Profibus/
Modbus/
DeviceNet
Sets ASTAT-XT’s communication PROTOCOL.
Operational when the Modbus communication PCB is installed.
Baud Rate
9600 (MODBUS)
1200,
2400,
4800,
9600
Sets
ASTAT-XT’s
Baud Rate
.
Parity Check
EVEN
EVEN,
ODD,
NO
Sets ASTAT-XT’s communication
Parity Check
.
Station Number
OFF
OFF,1 –
247
Sets ASTAT-XT’s communication
Station Number
.
S. Link Par. Set
Disabled
Enabled/
Disabled
Enables parameter modification via serial communication
Ser. Link Control
Disabled
Enabled/
Disabled
Enables start, stop, reset, etc. via serial communication
Store Settings
COMM. Parameters
Same
as
Store Settings Main Settings
Note:
After changing communication parameters and storing them,
control power must be switched OFF and ON to load the new
communication parameters.
4.7.10
– Page 8 – With the Profibus optional PCB
Function &
Default
Range
Unit
Description
COMM. PROTOCOL
Profibus
Profibus/
Modbus/
DeviceNet
Sets ASTAT-XT’s communication protocol.
Operational when the optional communication PCB is
installed.
Baud Rate
AUTO (Profibus)
User can not change the
Baud Rate
value.
Max. rate is 12 mega bit per second (MBPS).
Parity Check
AUTO (Profibus)
User can not change the
Parity Check
value.
PROFI.Network ID
OFF
OFF, 1-126
Sets the Profibus network ID.
When set to OFF the Profibus card will not function.
S. Link Par. Set
Disabled
Enabled/
Disabled
Enables parameter modification via serial
communication
Ser. Link Control
Disabled
Enabled/
Disabled
Enables start, stop, reset, etc. via serial communication
Store Settings
COMM. Parameters
Enabled/
Disabled
Same
as
Store Settings Main Settings
Note:
After changing communication parameters and storing
them, control power must be switched OFF and ON to
load new communication parameters.
42
Displays in MINIMIZED MODE and MAXIMIZED MODE.
