Settings
Under the
SETTINGS
option, you can
adjust the volume or the brightness of
the display.
VOLUME
n
End of Cycle (signal) volume can be set from
HIGH
,
MED
,
LOW
or
OFF
.
n
Control Sounds volume can be set from
HIGH
,
MED
,
LOW
or
OFF
.
DISPLAy BRIGHTNESS
can be set from
HIGH
,
MED
or
LOW
.
After you have made your selection,
press
ENTER
.
NOTE: To access the SETTINGS menu, hold
down the DRUM LIGHT button for 3 seconds
.
About dryer features.
Drum Lamp
Before replacing the light bulb, be sure to unplug the dryer power cord or disconnect the dryer at
the household distribution panel by removing the fuse or switching off the circuit breaker. Reach
above dryer opening from inside the drum. Remove the bulb and replace with the same size bulb.
About cycle options.
NOTE:
Notallfeaturesareavailableonalldryermodels.
Lock
You can lock the controls to prevent any selections
from being made. Or you can lock the controls
after you have started a cycle.
childrencannotaccidentallystartthedryer
bytouchingpadswiththisoptionselected.
To lock the dryer, press the
LOCK
button.
To unlock the dryer, press and hold the
LOCK
button for 3 seconds.
The light in center of the
LOCK
button will light up
when the controls are locked.
Even though the controls are locked, the
POWER
button is still active in case you have to turn the
unit off.
Push to Lock Control
Hold 3 Secs to Unlock
L
OCK
D
RUM
L
IGHT
S
ETTINGS
Press & hold for 3
seconds for secondary
options
10
