Oven Shelves
If your oven is equipped with nickel oven
shelves, they should be removed from the
oven before beginning the self-clean cycle.
To clean the nickel shelves, use an abrasive
cleanser. After cleaning, rinse the shelves
with clean water and dry with a clean cloth.
If the shelves ever become hard to slide,
wipe the shelf edges or oven shelf supports
with vegetable oil.
If your oven is equipped with gray porcelain-
coated shelves, they may be cleaned in the
oven during the self-clean cycle.
They may also be cleaned by using an
abrasive cleanser. After cleaning, rinse the
shelves with clean water and dry with a
clean cloth. If the shelves ever become hard
to slide, wipe the shelf edges or oven shelf
supports with vegetable oil.
Oven Light Replacement
CAUTION:
Before replacing your oven light bulb,
disconnect the electrical power to the range at the
main fuse or circuit breaker panel. Be sure to let the
light cover and bulb cool completely.
The oven light bulb is covered with a
removable glass cover that is held in place
with a bail-shaped wire. Remove the oven
door, if desired, to reach cover easily.
To remove:
Hold a hand under the cover so it
doesn’t fall when released. With
fingers of the same hand, firmly push
back the wire cover holder. Lift off
the cover.
Do not remove any screws to remove
the cover.
Do not touch hot bulb with a wet
cloth. Replace bulb with a 40-watt
household appliance bulb.
To replace cover:
Place it into the groove of the light
receptacle. Pull the wire forward to the
center of the cover until it snaps into
place. When in place, the wire holds
the cover firmly. Be certain the wire
is in the depression in the center of
the cover.
Connect electrical power to the range.
Wire cover holder.
Operating Instructions
Safety Instructions
Installation Instructions
Tr
oubleshooting T
ips
Consumer Support
38
Care and cleaning of the range.
