background image

Care and Cleating

USER MAINTENANCE
INSTRUCTIONS

 air conditioner off and

remove the plug from the wall
outlet before cleaning.

Grille & Cabinet

Wipe front grille with a clean cloth
lightly dampened with mild liquid

 detergent. Wash

cabinet with mild soap or detergent
and lukewarm water.

Outdoor Coil

This coil on the outdoor side

 the unit should be checked

periodically and cleaned if
clogged with dirt or soot from
the atmosphere. If extremely
soiled, it may need to be steam
cleaned, a service available
through your GE service outlet.

Front Grille

 the front grille if the

window sill prevents removal of
the air filter.

To remove the grille:

Step 1: Remove and save the screw
that holds the grille to the chassis.

Step 2: Press inward on the lower
right side of the cabinet until the
tab is clear of the slot and allow the
grille to come toward you slightly.

Step 3: Repeat this process for the
lower left 

Do 

 

 

 bottom 

 toward

you 

 than 3 

 or 

 

 top 2 tubs 

of 

 

 

Step 

4: 

Grasp the grille’s lower

right and left corner and carefully
lift straight upward to disengage the
2 top tabs from their slots in the
cabinet front edge.

To attach the grille:

Step 1: Set the air direction louvers
upward.

Step 

2: 

Grasp the grille’s upper

right and left corner and carefully
insert the VENT knob between the
lower air direction louver and the
grille frame, and engage two tabs
on the grille’s top inside edge with
two slots in the cabinet front edge.

Air Direction Louvers

Grille Frame “

FRONT VIEW

SIDE VIEW

Step 3: Press inward on the lower
right side of the metal cabinet at
the location of the slot and then
carefully push the grille in until the
tab engages with the slot.

Do not strike or 

 hit the

plastic grille or damage to the tabs

will 

Step 4: Repeat this process for the
lower left side.

Step 

5: 

Mount the grille on front

of the cabinet with the screw
attached to grille during shipping,
and slide the filter back into place.

SCREW

Air Filter

The air filter behind the inlet grille

should be washed at least every 30
days or as often as it needs cleaning.

To remove the filter, grasp the tab
on the filter and pull downward. 
the window sill blocks access to the
air filter, you must first remove the
front grille.

Vacuum the filter on the dusty side
to remove light dust. Wash the
filter, cleaner side up, under gently
flowing water to wash out
accumulated dust and lint. If the

 is very dirty, use a mild

household detergent in the wash
water. Let the filter dry thoroughly
before replacing it.

When replacing the filter, be sure
the word FRONT is facing you as
you slide the filter back into place.

Summary of Contents for AMV06

















Reviews: