background image

2

HELP US HELP YOU

• This air conditioner must be properly installed

in accordance with the Installation Instructions
before it is used. 

• Repair or replace immediately all electric 

service cords that have become frayed or
otherwise damaged.

• Unplug your air conditioner before

making any repairs. NOTE: We strongly
recommend that any servicing be
performed by a qualified individual.

SAVE THESE INSTRUCTIONS

Before using your air conditioner, 
read this guide carefully.

It will help you operate and maintain your new air
conditioner properly.

Keep it handy for answers to your questions.

If you don’t understand something or need 
more help, call:

GE Answer Center

®

800.626.2000
24 hours a day, 7 days a week.

If you received a damaged air
conditioner…

Immediately contact the dealer (or builder) that sold 
you the air conditioner.

Write down the model and serial numbers.

They are on a label on the right hand side of the case
and/or behind the grille on the front end of the base pan.

These numbers are also on the Consumer Product
Ownership Registration Card that came with your air
conditioner. Before sending in this card, please write
these numbers here:

Model Number:

Serial Number:

Use these numbers in any correspondence or service
calls concerning your air conditioner.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

IF YOU NEED SERVICE

To obtain service, see the Consumer Services page in
the back of this guide.

We’re proud of our service and want you to be
pleased. If for some reason you are not happy with the
service you receive, here are three steps to follow for
further help.

FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In most
cases, this will solve the problem.

NEXT, if you are still not pleased, write all the
details—including your phone number—to:

Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225

FINALLY, if your problem is still not resolved, write:

Major Appliance Consumer Action Panel
20 North Wacker Drive
Chicago, IL 60606

Summary of Contents for AMH06

















Reviews: