INSTALLATION INSTRUCTIONS
I
YOU BEGIN
Read these instructions completely and
carefully.
all governing codes
and ordinances.
sure to leave these
instructions with the consumer.
CONSUMER—Keep these instructions for
future reference.
ELECTRICAL REQUIREMENTS
FOR PERSONAL SAFETY:
●
THIS APPLIANCE MUST BE PROPERLY
GROUNDED. See grounding instructions.
●
DO NOT, UNDER
ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD GROUNDING
PRONG FROM THE POWER CORD.
●
WE RECOMMEND THAT YOU DO NOT USE
AN EXTENSION CORD OR AN ADAPTER
PLUG WITH THIS APPLIANCE.
●
DO NOT CHANGE THE PLUG ON THE
POWER CORD OF THIS APPLIANCE.
●
FOLLOW NATIONAL ELECTRICAL CODES
OR LOCAL CODES AND ORDINANCES.
230
15 AMP circuit
20 AMP circuit
15 AMP circuit
30 AMP circuit
“parallel” type
“perpendicular<’ type
“tandem” type
“tandem” type
●
If the electrical supply provided does not meet
the above specifications, call a licensed electrician.
●
Aluminum house wiring may pose special
problems–consult a qualified electrician.
●
This unit requires a separate circuit serving only
this appliance.
WINDOWREQUIREMENTS
●
Standard double-hung window with actual
opening width of 29” to 46”.
●
Clear vertical opening of 18“ minimum from
bottom of sash to stool.
●
Install the
conditioner in a window where
there will be enough clearance around the cabinet
to allow ample circulation of air through the unit.
t
29” to 46”
.
18“
min.
Note:
All
supporting parts should be secured to
firm wood, masonry or metal.
8