GE Allegro 60-874-95R, Installation Instructions Manual, Page: 32 / 44

Testing the System
26
Testing Sensors/Zones
We recommend that you test sensors/zones after all programming is completed and whenever a
sensor/zone-related problem occurs. See “SENSOR TEST (1st Tier)” on page 23 for complete
sensor test information.
If the system does not respond as described in Table 6, see “Appendix A: Troubleshooting” on
page 28.
Arms system silently
Turns chime feature on and off (only when system
is unarmed) Press once
Identifies alarms in memory Press once
Bypass
Disarm
Quick Exit
Press once, starts a 2 minute timer for use of one entry/
exit door.
Police Panic
Press and hold both buttons until panel indicates
alarm.
Emergency Panic
Press and hold both buttons until panel indicates
alarm.
Fire Panic
Press and hold both buttons until panel indicates
alarm.
Table 5: Basic Panel Operating Commands (Continued)
How to... Command
A r m
S i l e n t
+ Code +
C h i m e
7
*
S t a t u s
B y p a s s
#
+ Primary Code
D i s a r m
+ Code
Q u i c k E x i t
1
A r m
N o D e l a y
4
D i s a r m
C h i m e
7
S i l e n t
Table 6: Sensor “Tripping” Instructions
Sensor Do This
Number
of Beeps
DTIM Initiate a sensor test. 7-8
Door/Window Open the secured door or window 7-8
Carbon Monoxide Alarm Unplug the CO Alarm. Plug it back in, wait 10 seconds then press the
TEST/RESET button until the unit beeps 8 times 7-8
Glass Guard Tap the glass 3 or 4 inches from the sensor 7-8
Motion Sensor Avoid the Motion Sensor field of view for 5 minutes, then enter its view 7-8
Rate-of-Rise Heat Detector Rub your hands together until warm, then place one hand on the
detector for 30 seconds 7-8
Shock Tap the glass twice, away from the sensor. Wait at least 30 seconds
before testing again 7-8
Smoke Press and hold the test button until the system sounds transmission
beeps 7-8
Panic Buttons Press and hold the appropriate panic button(s) for 3 seconds 7-8
KeyChain Touchpad Press and hold LOCK and UNLOCK simultaneously for 3 seconds 7-8
Remote Handheld Touchpad Press and hold the 2 EMERGENCY buttons simultaneously for 3 sec-
onds 7-8
Hardwire Loops Open the secured door or window. 1