•
Anschluss 1 stellt vier programmierbare Digital-
eingangsklemmen, zwei zusätzliche digitale
Klemmen, die entweder als Eingang oder
Ausgang programmiert werden können, eine 24-V
DC-Klemmen-Versorgungsspannung und einen
„Common“-Ausgang für eine optionale, vom
Kunden bereitgestellte 24-V DC-Spannung bereit
•
Anschluss 2, Klemmen (+)68 und (-)69, sind für
eine serielle RS-485-Kommunikationsverbindung
bestimmt
•
Anschluss 3 stellt zwei Analogeingänge, einen
Analogausgang, 10-V DC-Versorgungsspannung
und „Common“-Anschlüsse für die Ein- und
Ausgänge bereit
•
Anschluss 4 ist ein USB-Anschluss zur
Verwendung mit der DCT-10
•
Es werden ebenfalls zwei Form-C-Relaisausgänge
bereitgestellt, die sich je nach Konfiguration und
Größe des Frequenzumrichters an verschiedenen
Positionen befinden
•
Einige Optionsmodule, die zur Bestellung mit
dem Gerät verfügbar sind, stellen ggf. weitere
Klemmen bereit. Näheres finden Sie im Handbuch
der Geräteoption.
Nähere Angaben zu Klemmenspezifikationen finden Sie in
8.1 Allgemeine technische Daten
.
Klemmenbeschreibung
Digitalein-/-ausgänge
Klemme
Parameter
Werksein-
stellung
Einstellung
Beschreibung
12, 13
-
+24 V DC
24-V-DC-Versorgungs-
spannung Maximaler
Ausgangsstrom ist 200
mA insgesamt für alle
24-V-Lasten.
Verwendbar für Digita-
leingänge und externe
Messwandler.
18
E-01
[8] Start
Digitaleingänge.
19
E-02
[0] Ohne
Funktion
32
E-05
[0] Ohne
Funktion
33
E-06
[0] Ohne
Funktion
27
E-03
[0] Ohne
Funktion
Wählbar als Digitalein-
oder -ausgang.
Werkseinstellung ist
Eingang.
29
E-04
[14] Festdrz.
(JOG)
Klemmenbeschreibung
Digitalein-/-ausgänge
Klemme
Parameter
Werksein-
stellung
Einstellung
Beschreibung
20
-
„Common“ für Digita-
leingänge und 0-V-
Potential für 24-V-
Stromversorgung.
Analogeingänge/-ausgänge
39
-
„Common“ für Analog-
ausgang
42
AN-50
Drehzahl 0 -
Max. Drehzahl
Programmierbarer
Analogausgang. Das
Analogsignal ist 0-20
mA oder 4-20 mA bei
maximal 500
Ω
50
-
+10 V DC
10-V DC-Analogversor-
gungsspannung.
Maximal 15 mA, in der
Regel für Potenti-
ometer oder
Thermistor verwendet.
53
AN-1#
Sollwert
Analogeingang.
Programmierbar für
Spannung oder Strom.
Schalter A53 und A54
wählen mA oder V.
54
AN-2#
Istwert
55
-
„Common“ für Analog-
eingang
Serielle Kommunikation
61
-
Integriertes RC-Filter
für Kabelabschirmung.
NUR zum Anschluss
der Abschirmung bei
EMV-Problemen.
68 (+)
O-3#
RS-485-Schnittstelle.
Ein Schalter auf der
Steuerkarte dient zum
Zuschalten des
Abschlusswiderstands.
69 (-)
O-3#
Relais
01, 02, 03
E-24 [0]
[0] Alarm
Form-C-Relaisausgang.
Verwendbar für
Wechsel- oder Gleich-
spannung und
ohmsche oder
induktive Lasten.
04, 05, 06
E-24 [1]
[0] Betrieb
Tabelle 3.2 Klemmenbeschreibung
Installation
AF-600 FP-Kurzanleitung
10
DET-759A/D
3
3