For Normal Cooling
For Maximum Cooling
1. Set the Selector Switch HIGH COOL.
1. Set the Selector Switch at HIGH COOL.
2. Set the Thermostat Control the desired number
2. Turn the Thermostat Control to 10.
(usually 5-7 is a good starting position). If room
3. Set the Ventilation Control at CLOSED.
temperature is not satisfactory after a reasonable time,
set the Thermostat Control at a higher number for a
4. Set the Energy Saver Switch at the NORMAL
cooler room or at a lower number for a warmer room.
position.
3. Set the Energy Saver Switch NORMAL position
for continuous fan operation or at SAVE position to
automatically cycle the fan on and off with the
compressor.
4. Set the Ventilation Control at CLOSED except for
brief periods when you want to exhaust room air to
the outside.
For Quieter Operation
1. Set the Selector Switch at LOW COOL position.
3. Set the Ventilation Control at CLOSED.
2. Turn the Thermostat Control to the desired number.
4. Set the Energy Saver Switch at the NORMAL
When the Thermostat Control is set on 9 or
and the
position.
Fan is set on low speed, moisture may freeze on the
NOTE: When the Energy Saver Switch is at the SAVE
coils
prevent the unit from cooling. If this
position, changes in the sound level may be more
happens, set the Fan at high speed and set the
noticeable than when it’s at the NORMAL position.
Thermostat Control to a lower number.
For Nighttime Operation
For Extreme Temperatures
During the cooler evening hours, we recommend that you
For greatest economy and best performance, we
set the Selector Switch at LOW COOL for very quiet
suggest you set the Selector Switch at HIGH COOL
operation and the Thermostat Control at mid-range
in extremely hot weather.
(5 or 6). Set the Ventilation Control at CLOSED and the
Energy Saver Switch NORMAL or SAVE position.
To Adjust Air Direction
Up and down
Side to side
OFF
ON
This model has a
Switch. For fixed
side air direction, slide the
Switch to ON
until the air is blowing in the direction you want, then
Separate banks of up-and down air direction louvers
move it to OFF.
are controlled by fingertip pressure on the louvers.
For continuous side-to-side air circulation, set the
They regulate air discharge upward, downward or
Switch to ON and leave it there.
straight out.
5