INSTALL THE AIR CONDITIONER
IN THE CASE (CONT.)
IMPORTANT!
Reconnect the ground wire to
the air conditioner with the washer and
screw removed earlier.
If your model has the
control connectors,
reconnect them to the
front grille by pressing
them together until the
locking tabs snap into place.
Attach the front grille frame to the case by
inserting the tabs on the grille frame into the
slots on the front top of the case. Push the
grille frame in until it snaps into place
around the power cord on the right side.
On models with control knobs, replace
them by aligning them on their shafts and
pushing them firmly into place.
Secure the front grille frame to the case with
a Type B screw.
Install the filter. Connect power.
H
G
F
E
D
C
7
Installation Instructions
INSTALL A SUPPORT BRACKET
AND THE FOAM TOP WINDOW
GASKET
Attach a support bracket with a Type C
screw.
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
C
B
A
6
15
INSTALL THE AIR CONDITIONER
IN THE CASE
Slide the air
conditioner into
the case. Do not
push on the
controls or the
finned coils.
Make sure the
air conditioner
is firmly seated.
Reinstall the locking bracket and screw
removed earlier.
B
A
7
Guide the levers carefully
through the grille frame as
you push it in.
Screw
Ground wire
Washer
