Installation Instructions
REMOVE THE AIR CONDITIONER
FROM THE CASE
Remove and discard the 2 shipping screws
from the bottom rear of the case.
Grasp the filter tab at the bottom center of
the grille and pull the filter down and out.
On models with control knobs, remove them
by pulling them straight off their shafts.
Grasp the lower corners of the grille frame
while pressing in on the case sides with your
finger tips. Pull out to release and lift it up.
NOTE:
Do not pull the
bottom edge toward
you more than 3
″
or
you may damage the
tabs of the grille.
D
C
B
A
3
REMOVE THE AIR CONDITIONER
FROM THE CASE (CONT.)
On some models, you must also
disconnect the control connectors before
the grille frame can be removed. Press the
locking tabs in while pulling on the other
side to release.
Remove the locking screw and locking
bracket from the lower frame.
Remove the screw and washer securing
the ground wire to the right side face of
the unit.
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
H
G
F
E
3
Screw
Ground wire
Press in
Pull
Press in
12
Washer