GE 5350375 Service Manual Download

Page: 84 / 336

GE H

EALTHCARE

PROPRIETARY TO GE

IRECTION

5344303-100, R

EVISION

VIVID P3 S

ERVICE

ANUAL

3-22

Section 3-6 - System Configuration

3-6-4-4

Connect peripherals

(cont’d)

E.) Connect Foot Switch to the system.

Foot Switch can be properly connected to any USB Ports in the Rear panel.

F.) Connecting S-Video cable to the system.
S-Video O/P is available on rear panel.

G.) Connecting the CRT to the system.

SVGA connector available on Rear panel.

H.) Connect the USB Memory stick to the system. The USB Memory stick can be properly connected

in top panel USB port or in any of the Rear panel USB Ports.

I.) Connect the USB HDD to the system. The USB Harddisk can be properly connected to Rear Panel

USB ports.

NOTE:

Please scan the devices (USB Pen Drive, HDD etc...) for virus - before using it with the
system.

Figure 3-15 Connect Foot Switch to the system

Figure 3-16 USB Memory Connection

Foot switch

USB Ports

Summary of Contents for 5350375
















































































































































































































































































































































Search results

Summary of Contents for 5350375

Reviews:

Related manuals for 5350375

Brands by name

Popular brands

GE 5350375, Service Manual

Search results

Summary of Contents for 5350375

Reviews:

Related manuals for 5350375

Brands by name

Popular brands