26
S
CREENING
C
ALLS
(A
UTO
D
ISCONNECT
F
EATURE
)
You can screen incoming calls by listening as the caller leaves a message.
If you want to talk to that caller, pick up the attached phone or any
extension phone.
R
EMOTE
A
CCESS
You can access your answering system from any touch-tone phone by
entering your 3-digit security code (the default security code is 123, but you
can change it.) Be aware that remote functions do not work with rotary or
push-button, pulse-dialing phones. You should cut out and save the wallet-size
remote card on page 41 so you will have the touch-tone commands when you
want to listen to your messages from another location.
A
CCESSING
Y
OUR
A
NSWERING
S
YSTEM
1. Call your telephone number.
2. After you hear the greeting and the beep, enter your 3-digit security
code. To bypass the greeting, enter your 3-digit security code any time
while the greeting is playing.
3. The unit plays the remote menu after you enter the correct security
code. You may make menu selections while the menu is playing.
NOTE:
The unit answers on the 10th ring if the unit is turned off or if the
memory is full. To access the answering system, enter the 3-digit security code
after the beeps. If memory is full, playback your messages and erase some of
them to restore memory. If the answering system is off, press 2 to turn it on.
NOTE:
After the unit plays the remote menu, it waits 18 seconds for a
command to be entered. If a command is not entered, the unit disconnects.