25
Answering system
This section explains how to set up your answering system. Before you begin
the setup process, please make sure that the answering system is on.
Press
on the telephone base to turn the answering system on or off. The
button on the telephone base will light when the answering system is
on.
The following table shows the answering system status.
Answering system status
Glows blue
Answering system is ON.
No light
Answering system is OFF.
Flashes slowly
There are new messages.
Flashes rapidly
Message capacity is full.
Telephone base volume
Use the
button to adjust the playback volume at the telephone base
to a comfortable level (a beep tone will sound when the volume reaches the
maximum or minimum level.)
Outgoing Announcement (OGA)
When the answering system answers a call, the pre-recorded outgoing
announcement is played to the caller unless you have recorded your own
outgoing announcement.
