manualshive.com logo in svg

GE 28522, User Manual, Page: 44 / 50

Share
Download
GE 28522 User Manual Download Page 44

Appendix

40

This feature is included as a convenience only. The manufacturer assumes no 

responsibility for customer reliance on the memory feature of this product. 

Testing emergency telephone numbers is not recommended.

 However, if you 

choose to make a test call to an emergency number, you should:
•  Remain on the line and provide an explanation for the call before you hang 

up.  

•  Only make a non emergency test call during off-peak hours during early 

mornings or late evenings.  

To ensure user safety, the FCC has established criteria for the amount of radio 

frequency energy that can be safely absorbed by a user or bystander according 

to the intended usage of the equipment. This equipment has been tested and 

found to comply with the FCC criteria. The handset may be safely held against 

the ear of the user. The telephone base should be installed and used such that 

parts of the users body other than the handset are maintained at a distance of 

approximately 8 inches (20 cm) or more.   

THE LIGHTNING 

FLASH AND ARROW 

HEAD WITHIN 

THE TRIANGLE IS 

A WARNING SIGN 

ALERTING YOU 

OF “DANGEROUS 

VOLTAGE” INSIDE 

THE PRODUCT.

CAUTION

RISK OF ELECTRICAL SHOCK, DO NOT OPEN 

CAUTION: TO REDUCE THE 

RISK OF ELECTRICAL SHOCK, 

DO NOT REMOVE COVER (OR 

BACK). NO USER SERVICEABLE 

PARTS INSIDE. REFER 

SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

THE EXCLAMATION 

POINT WITHIN 

THE TRIANGLE IS 

A WARNING SIGN 

ALERTING YOU 

OF IMPORTANT 

INSTRUCTIONS 

ACCOMPANYING 

THE PRODUCT.

WARNING: TO PREVENT 

FIRE OR ELECTRICAL 

SHOCK HAZARD, DO 

NOT EXPOSE THIS 

PRODUCT TO RAIN OR 

MOISTURE.

This product meets ENERGY STAR program requirements for energy 

conservation. Selecting ENERGY STAR products is a responsible way 

to save energy and money while protecting our environment.  

ENERGY STAR is a U.S. registered mark.

The RBRC seal on the battery used in your product indicates that CCT 

is participating in the Rechargeable Battery Recycling Corporation 

(RBRC) program to collect and recycle rechargeable batteries. We 

encourage you to explore the easy recycling options available to 

you in your area. For more information visit www.rbrc.org or call 

1-800-8-BATTERY or contact your local recycling center.
In accordance with California Proposition 65, CCT advises that nickel 

is a chemical known to the State of California to cause cancer.

Summary of Contents for 28522



















































Reviews:

No comments