GE 28223 Series User Manual Download Page 46

Page: 46 / 68

Edit Records

From Phonebook Sub-Men:

1. Use the

caller ID-volume

(

) button to scroll to

EDIT

RECORDS

. Press the

mute/menu OK

button to confirm, the screen displays

the records.

. Use the

caller ID-volume

(

) button or key in alphabet to

move to desired record, press

mute/menu OK

button to confirm.

The screen displays

ENTER NAME

. Repeat Steps through 7 in “Add Records” section.

Delete Records

From Phonebook Sub-Menu:

1. Use the

caller ID-volume

(

) button to scroll to

DELETE

RECORDS

. Press the

mute/menu OK

button to confirm, the screen displays

the records.

. Use the

caller ID-volume

(

) button or key in alphabet to

move to desired record, press the

delete/int/conf

button. The

screen displays

DELETE?

. Press the

delete/int/conf

button again to confirm.

NOTE: If you don’t want to change or delete a record,

simply press the END button, or wait for one minute to exit

automatically.

Summary of Contents for 28223 Series





































































Search results

Summary of Contents for 28223 Series

Reviews:

Related manuals for 28223 Series

Brands by name

Popular brands

GE 28223 Series, User Manual

Search results

Summary of Contents for 28223 Series

Reviews:

Related manuals for 28223 Series

Brands by name

Popular brands