15
Wall Mounting
1. Plug the AC power adaptor into the electrical outlet and the DC connector into the
jack on the back of the base.
. Plug one end of the 6” straight telephone line cord into the jack on the bottom of
the base.
. Close the kick-stands on the bottom of the base unit if you’ve opened them.
4. Feed the line cord through the groove and plug the end into the modular
telephone jack.
5. Close the kick-stands if they are extended and slip the mounting holes (on the
bottom of the base) over the wall plate posts and firmly slide the unit down into
place.
Answering System Setup
This section shows you how to set up your answering system to receive incoming
calls. Before you begin the set up process, you must turn on the answering system.
• Press the
ans on/off button to turn the answering system on and off. The
Message Indicator lights when the answering system is on. The indicator blinks
when you have new messages.
NOTE: The answering system displays “- -” when it is off.
Voice Instructions
If you need additional assistance; while in standby mode, press the review button on
the base and follow the voice instructions.
Speaker Volume
Use the
volume (
5
or
6
) buttons to adjust speaker volume on the base to a
comfortable level. L1 is the minimum speaker volume and L8 is the maximum.