17
Answerer Setup
You can program the following items independently for MAILBOX 1 and MAILBOX under
the ANSWERER SETUP menu; Answer ON/OFF, Outgoing Announcement, Rings to Answer,
Security Code, Forwarding Messages, and Recording Quality. To access the ANSWERER
SETUP Menu:
1. Make sure your phone is
OFF
(not in talk mode).
. Press the
MENU
soft key to go to the main menu.
3. Use the
5
or
6
buttons to scroll to
ANSWERER SETUP
.
4. Press the
SELECT
soft key to confirm.
5. Use the
5
or
6
buttons to select
MAILBOX 1
or
MAILBOX 2.
Outgoing Announcement
You may program the following items under the Outgoing Announcement menu;
Reviewing the Outgoing Announcement, Recording the Outgoing Announcement and
Changing the Outgoing Announcement.
Reviewing the Outgoing Announcement
From the Answerer Setup Menu:
1. Use the
5
or
6
buttons to scroll to
ANNOUNCEMENT
.
. Press the
SELECT
soft key to enter the menu.
3. Press the
5
or
6
buttons to select
PLAY
.
4. Press the
SELECT
soft key to start playing the announcement.
PLAYING
ANNOUNCEMENT
shows in display.
5. Press the
EXIT
soft key when you have finished reviewing the announcement.
Recording the Outgoing Announcement
For best results when recording, you should be about nine the inches from the
microphone, and eliminate as much background noise as possible.
From the Answerer Setup Menu:
1. Use the
5
or
6
buttons to scroll to
ANNOUNCEMENT
.
. Press the
SELECT
soft key to enter the menu.
3. Press the
5
or
6
buttons to select
RECORD
.
4. Press the
SELECT
soft key to display
RECORDING ANNOUNCEMENT.
5. Press the
YES
soft key to record your announcement.
NOTE If do not wish to record an announcement, press the
NO
soft key.
6. Press the
END
soft key when finished with recording, announcement will play back.
NOTE: To replay the announcement again, press the
REPLAY
soft key.
