![GE 22437 User Manual Download Page 9](http://html.mh-extra.com/html/ge/22437/22437_user-manual_124595009.webp)
Note: The CALL LOG icon and display indicator disappear only after
browsing through all the entries.
Edit Call Log memory
When browsing Call Log memory, Caller Line Identification (CLI)
number can be edited before dial back. Amended CLI number will
not overwrite the stored Call Log memory.
Press 0-9 to add digits in front of CLI number.
Press
to remove entry or leftmost digit.
Press
or
key can recover the original CLI number.
Example:
CLI number is 12345678
Press digit 1, display is 1 12345678
Press digit 2, display is 12 12345678
Press
, display is 12345678
Press digit 3, display is 3 12345678
Press
, display is 12345678
Press
, display is 2345678
Press
, display is 345678
(
key is no function if number is 6 or less digit )
Holding Calls /Forwarding Calls
If the telephone is connected to a PABX system, it is possible to put
calls on hold and call other extension lines or to forward calls.
Press key to put the call on hold and dial the extension
number (e.g. 23).
Press key once more can re-take the call again or press
key to forward the call.
Note:
The above information can vary according to the PABX system
used. Therefore, refer to the relevant information of the PABX
network.
Intercom Call Transfer
It is possible to put an external call on hold and call another handset
registered to the base or to forward calls.
Press
key to hold the external call and initiate an internal
call.
Input the desired handset number (e.g. 2).
The target handset will ring. After the internal connection is
made, press
key to transfer the external call.
If
key is pressed before another handset is answered, the
call transfer procedure will be cancelled and the external call
connection is regained.
Teleconference
After have received an external call, it is possible to include a second
handset in the conversation (three way conference).
Press
and enter the number of the corresponding handset
(e.g.2) which will join the teleconference.
The external caller is kept on hold. As soon as handset 2 takes
the call, the internal connection is established.
Press the
key any time, and then press
or
key
scroll to “CONFERENCE”.
Press
will start the 3 way conference.
Press
again, “SINGLE CALL” will show and then press
will
end the 3 way conference and return to intercom call.
Note: The handset which initiates the intercom call can switch
een the phone call and the intercom handset by pressing
betw
key and th
ess
en
pr
or
key to
s
ct “S
CH”.
y pressing the
ele
WIT
B
key, any of the handsets can quit from the
teleconference and the other handset continues with the external
call.
Handset Speaker Phone
Press
key to activate or deactivate the handset speaker. The
icon turns on or off.
– 9 –