GE 22437, User Manual

Page: 15 / 18

number key, press key to confirm the setting and enter
month and date setting.
Input the correct month and date, the format is: date/month
(date range: 01-30/31, month range: 01-12) using number key,
press
key to confirm the setting and enter time setting.
Input the correct time, the format is: hour/minute (hour range:
00-23 for 24 hours format or 01-12 for 12 hours format; minute
range: 00-59) using number key, and set the “am” , “pm” or 24
hours format using or key.
Press key to confirm the setting.
Note : If the value you input is over the range during setting, you can’t
enter next setting by pressing key.
Registration
Registering Additional Handsets
Further handset of the same model can be registered on one base
station.
Press key until the REGISTRATION menu appears and
press key.
Press or key to select the submenu REGISTER and
press key.
Enter the PIN (factory setting =0000) and press
key
Handset display shows SEARCHING.
Press and hold
page
key on the base station for 10 seconds until
acknowledgement signal is heard.
Note: 1.Once the registration procedure is completed, the new
handset will automatically be allocated the next available handset
number.
2. The base will be ready for registration for 2 minutes when
the
page
key is pressed and hold for more than 10 seconds. During
the handset searching for a base station which is available for
registration. “searching” will be shown on the LCD display .
Remove a Handset from the Base
If several handsets are registered on one base station, they can
deregister each other mutually. The last handset can not be
deregistered.
Press key until the REGISTRATION menu appears and
press key.
Press or key to select the submenu REMOVE
HANDSET and press key.
Enter the PIN (factory setting =0000) and press
key
If necessary, use or key to select the handset and
press key. REMOVE HANDSET? will show on the
display.
Press key to confirm.
Technical Specifications
Handset Operating Time:
(average values*)
Approx. 10 hours talk time
Approx. 100 hours standby
AC / DC Adaptor
(for Base)
VD060035D
Input: 230V AC / 50 Hz
Output: 6V DC, 350mA
Single-phase AC excluding IT
installations defined by the EN 60950
standard.
Caution: the network voltage is classified
as a hazard by the criteria of this
standard.
Telephone connection Appliance designed for connection to an
analogue telephone line class TNV3
(telecommunications network voltage) as
defined by the EN 60950 standard.
Rechargeable Battery per
Handset GP60AAAHC, 2 x 1.2V / 600mAh /
Ni-MH, AAA or equivalent
– 15 –