Operation Indicator
Low Speed
Medium Speed
High Speed
“ O ” and “ I ” dim switch
Wall Control Operation
4
NOTE:
-To prevent damage to transmitter, remove the battery if not used for long periods.
-Please contact your local batteries recycling center for proper battery disposal information.
For this fan, the dim switch should be in
the “I” position, allowing for dimming of
the light. Place the switch in the “0"
position to turn the dimming feature off
if you do not want the dimming feature.
NOTE:
For convenience, the transmitter has been
preset by the factory in the unlock position.
With this setting the transmitter will work
with GE
Branded
compatible fans without any
further programing.
-
Lock/unlock switch when placed in the unlock position
allows a common code to be sent
.
In the unlock
position :
The transmitter will send a common code, this transmitter will operate all other GE
BRANDED
fans
with the same
receiver
configuration.
In lock position
: Allows a unique code to be sent to the receiver in the fan. Only the receiver of this fan will be synced with this transmitter in
lock position. More than one fan can be synced with one transmitter, in this case-follow sync instruction for each fan.
