67
PRESS TALK KEY
Indicates CID number is Direct Dial Number (DDN)
and cannot be formatted.
CHARGING............
This occurs when the handset is placed on the
cradle after the battery is inserted. The handset
needs to be fully charged before it can function
properly
Handset Sound Signals
Signal
Meaning
A long warbling tone (with ringer on)
Signals an incoming call
Three short beeps
Page signal
One long beep
Confirmation tone for the
completion of a function
One short beep (every 7 seconds)
Low battery warning
One short beep (during room monitoring) Ring alert tone
Troubleshooting Guide
Telephone Solutions
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the wall
jack.
• Connect another phone to the same jack. If it doesn’t work, the problem
might be your wiring or local service.
• The handset may be out of range of the base. Move closer to the base.
• Make sure the battery is properly charged (for 16 hours).
• Make sure the battery pack (in the handset) is properly installed.