62
Storing VIP Melody
1. Make sure the phone is
OFF
(not in talk mode).
2. Press the mute/prog button once to display the submenus;
ROOM
MONITOR
and
HANDSET SETUP
.
3. Press the
or
buttons to scroll to the
HANDSET SETUP
.
4. Press the mute/prog button to enter into this
HANDSET SETUP
.
5. Press the
or
buttons to scroll to VIP MELODY submenu.
6. Press the mute/prog button to select VIP melody feature and then display
VIP 1 record.
NOTE:
If VIP1 does NOT contain any specific number/records, it will display
“EMPTY.”
7. Press the cid/vol
or
buttons to select the specific VIP melody
memory location (10 VIP locations) that does not contain any record.
8. Press the mute/prog button to display
SELECT MEMORY
.
NOTE:
If the memory location does not contain any CID memory records
and you are trying to mark a specific record as VIP MELODY, then “SELECT
MEMORY” will not be displayed. Instead, “NO USER MEMORY” will display in
prompt to alert the user.
9. Press the cid/vol
or
buttons to view the records from memory to be
selected as VIP.
10. Press the mute/prog button to confirm and then
VIP MELODY 01
displays.
11.Press the cid/vol
or
buttons to select from melody 01 to melody 10
(a testing tone is generated while making melody selection)
12. Press the mute/prog button to confirm.
NOTE:
If the desired number/record was previously stored in any one of the
ten VIP melody records, “DUPLICATE NUMBER” shows on the display.
Changing a Stored VIP Melody Record
Use the Storing VIP Melody procedure to change the number of a selected
record and replace the old phone number with new phone number.