GE 21098 User Manual Download Page 17

17

l)  Message counter has 

SP

 on the display - Spanish is selected as the 

current voice prompt during language selection.

NOTE: 

While the messages are playing, the message counter will display the 

messages in the order they were received.

NOTE:

 The maximum recording time for each message is 3 minutes and the 

total recording time of this unit is 20 minutes.

Leaving A Message

1. After the answerer gets the line and plays the outgoing announcement, 

the caller can enter the mailbox number (1, 2 or 3) during the play 
of outgoing announcement or within the 2 seconds after the end of 
outgoing announcement and then leave a message in that specific 
mailbox.

2. If there is no entry of mailbox number during that period, then your 

message will be left in the default mailbox 1.

Screening Calls

1. When the answering machine answers the call, listen at the base while 

the caller leaves a message (to determine who is calling) or press 

SELECT on the handset to listen on the earpiece.

2. To speak to the caller, press the SPEAKER button on the base or pick up 

the handset, and press the TALK/END/call back or SPKR buttons.

The answering system automatically stops recording when you activate the 

handset or pick up an extension phone.

TIP:

 Make sure the volume on the base is set loud enough to hear your 

incoming calls.

Mailbox Indicator

The mailbox button/indicators inform you of messages for each individual 

mailbox and whether they are new or old.
  • Mailbox button/indicator is on; stored messages.
  • Mailbox button/indicator is off; no messages.
  • Mailbox button/indicator is flashing; new messages.

Summary of Contents for 21098

























































































































































Reviews: