49
S
CREENING
C
ALLS
WITH
THE
C
ORDLESS
H
ANDSET
You may use the cordless handset to remotely screen calls.
1. Make sure the phone stops ringing and the answering system answers
the call.
2. Press the exit/answerer button to access the answering system.
3. Listen as the caller leaves a message.
4. Press the talk/callback button to speak to the caller, or press the exit/
answerer button again to stop screening the call.
A
CCESSING
THE
A
NSWERING
S
YSTEM
FROM
A
NOTHER
L
OCATION
You can access your answering system from any touch-tone phone by
entering your 3-digit security code after you hear the outgoing
announcement.
1. Dial the phone number to which the answering system is connected.
2. When the answering system answers enter the security code after you
hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
TIP:
During remote access you may bypass the outgoing announcement by
pressing any number key on the touch-tone pad while the announcement is
playing. Then, enter your security code to access the answering system.
M
EMORY
F
ULL
When you access your answering system remotely, and the answering
system’s memory is full, the system answers after 10 rings, beeps, and
waits for you to enter the 3-digit security code. You have 10 seconds to
enter the security code before the phone disconnects. You should erase
some old messages so the system can record new messages.
NOTE:
The unit also answers after the 10th ring if it is turned off. To access the
answering system, enter your 3-digit security code after you hear the beep.
