background image

3

Caller ID (CID)

IMPORTANT: In order to use this unit’s Caller ID features, you must 

subscribe to either the standard Name/Number Caller ID Service or 

Call Waiting Caller ID Service. To know who is calling while you are 

on the phone, you must subscribe to Call Waiting Caller ID Service.

This unit receives and displays CID information transmitted by your local telephone 

company. This information can include the phone number, date and time; or the 

name, phone number, and date and time.

Caller ID phone 

number

9:58   11/24       01

317‐555‐1234

STEVE

NEW   CALL

#

AM

Time

Date New/Repeat

Caller ID Location

Caller ID name

STEVE

317‐555‐1234

9:58   11/24       01

NEW   CALL

#

AM

Base CID display

Handset CID 

display

Call Waiting Caller ID

Provided you subscribe to Call Waiting Caller ID service from your phone company; if 

you receive an incoming call and you are already on the phone, a beep indicates the 

presence of a Call Waiting call on the line. Only the handset that is in use at the time 

of the call will display and store the Call Waiting Caller ID information.
•  When you hear the call waiting beep, press the menu/flash button on the base 

or the flash/call waiting/answerer button on the handset to put the current call 

on hold and answer the incoming call. Press the menu/flash or flash/call waiting/

answerer again to return to the original call. 

Receiving CID Records

When you receive a call, Caller ID information is transmitted by the phone company 

to your telephone between the first and second ring. The Caller ID information 

appears on your phone’s display while the phone rings, giving you a chance to 

monitor the information and decide whether or not to answer the call.

Summary of Contents for 17670

















































Reviews: