Problem
Possible Causes
What To Do
CLEAN light
The oven door was
•
Turn the Oven
is on when you
accidentally locked.
Temperature knob to
OFF
.
want to cook
Allow the oven to cool.
Never force the door
latch handle.
“F—and a number”
You have a function
•
If a function error code
flash in the display
error code.
appears during the self-
cleaning cycle, check the
oven door latch. The latch
may have been moved, even
if only slightly, from the
locked position. Make sure
the latch is moved to the
right as far as it will go. Turn
the Oven Temperature
knob to
OFF
. Allow the
oven to cool for one hour.
Put the oven back into
operation.
•
Disconnect all power to
the range for 5 minutes
and then reconnect power.
If the function error code
repeats, call for service.
Power outage
Power outage or surge.
•
Some models will
automatically resume their
setting once the power is
restored. On models with a
clock, you must reset the
clock. If the oven was in
use, you must reset it by
turning the Oven
Temperature knob back to
OFF
, setting the clock and
resetting any cooking
function.
Troubleshooting T
ips
Installation Instructions
Customer Service
Operating Instructions
Safety Information
41
