©
2009 by ge-tectronic
Page: 6
Picture 4:
Plug the charger cable of the PDA/PNA into the connector
socket of the ISO-Adapter cable.
Tip:
12V Socket for the Navi Charger Cable
The
FastMute
Sonic XL
provides a connector socket with a screened supply (+12V) for the connection
of Navi-charger cables. This power supply is specifically designed for the connection of your vehicle Navi charger
cable. Because of the various shapes of the charger plugs, it is possible that, during driving, the plug becomes
loose; therefore it is recommended that the plug should be secured to the socket with adhesive tape.
The charger cable of the Navi must not be modified. The Navi must not be connected directly (without
charger plug) to the socket.
Note: The 12V output for Navi-charger cable is also controlled by AutoPower-funktion of
FastMute
Sonic XL
.
c. Connecting audio equipment (PNA, PDA, PPC, MP3-Player, etc.)
FastMute
Sonic XL
is equipped with two 3.5mm jack sockets for connecting audio sources. The two
sockets can be found near the ISO-Adapter socket and are marked as Audio-IN 1 and 2 (suitable jack plugs can
be found in our catalog).
If both audio sources are played simultaneously into both inputs (e.g. MP3-Player and Navi), both audio
signals will be mixed together.
.
Note that if you supply your own cables and plugs,
they must follow the diagram shown here.
NOTE: Mono-jack connectors (2-core) cannot be used.
Picture 5.
Connect the external audio source (Navi, PDA, PNA,
etc.) with a stereo jack cable to an audio input on the
FastMute
Sonic XL
.
Suitable jack plug cables for equipment with 2.5mm or
3.5mm connectors can be found in our catalog.
Warning: When the integrated Multiprofile-Bluetooth® function is used, only Audio-IN 1 can
be used for audio sources. As soon as audio connection 2 is used, then the audio signal from the
