GE Security NetworkX NX-1300E, User Manual

Page: 8 / 24

Page 6
INSTANT LIGHT
The instant light is “on” when there is no delay on your entry/exit door(s).
Any time the instant light is “on” and the exit delay has expired, the
opening of an entry/exit door will produce an immediate alarm . The
instant light can be toggled on or off by pressing the [ Stay ] key while the
system is armed. When the instant light is “off”, the entry/exit door(s) is
delayed.
POWER LIGHT
The power light is on if the primary power is on. The power light will flash if
the system has a low battery condition.
READY LIGHT
The ready light is “on” when the system is ready to arm and “flashes” if
ready to force arm. The ready light is off when the system is not ready to
arm because of a zone(s) being faulted.
STAY LIGHT
The stay light is “on” when the all interior (motion detector) zones are
bypassed.
ZONE LIGHT
The zone lights are “off” when everything is normal. A zone light will be “on”
if the zone has been bypassed. If a zone light is “flashing”, that zone is in
alarm or has been faulted. If a zone light is “flashing” rapidly, it means that
the zone is in a trouble condition. Trouble conditions are:
Tamper Hardware Low Battery Loss of Supervision
(A combination of Alarm/Fault and Tamper/Trouble will produce a rapid
“flashing” light for a short period of time, followed by a slow “flashing”
light.)