GE Security GE-DS-82, Installation Manual

Page: 3 / 12

P/N 1069669-EN • REV 1.01 • ISS 24MAR10 3 of 11
Figure 1: Terminal setup diagram
PC / Workstation
with
Terminal emulation software
Managed Switch
Serial Port
Serial Port
57600,8,n,1
RS-232
A terminal program is required to make the software connection to the GE-DS-
82 and the GE-DS-82-PoE Managed Switch. Window’s Hyper Terminal program
is a good choice. The Hyper Terminal program can be accessed from the Start
menu.
1. Click
START , then Programs/ Accessories and then Hyper Terminal .
2. When the COM1 Properties window appears, configure the COM port with
the following parameters and then click the OK button.
• Baud : 57600
• Parity : None
• Data bits : 8
• Stop bits : 1
• Flow Control : None
Figure 2: The COM1 properties window