GE Security CyberDome II, User Manual

Page: 40 / 58

CyberDome II
User Manual
32
Figure 45. Tour programming menus
3. Navigate to option 1 and pan right to edit the tour.
4. Navigate through and use iris + to set the preset, position , dwell time , speed , zoom , and TTL
( Figure 46 ).
Figure 46. Sample tour program settings
TOUR X PROGRAMMING
ST POS DW SPD ZM TTL
ST = Step of the preset. May have up to
64 presets and must be set for a preset
tour.
POS = Preset number assigned to that step
of the tour
DW = Dwell time. This is the amount of
time that the position is held before
moving to the next step of the tour.
SPD = The speed that the camera travels
to that preset.
ZM = FZ or ZO. FZ freezes the last image
while moving to the next preset. ZO zooms
out first, moves to the next preset, then
zooms to the preset numbers zoom factor.
TTL = Turns the preset title on or off