TD220X_manual_v8.doc
Page 38 of 48
1/27/2017
Parameter
R/W
Description
Tx Beacons
R
The number of beacon messages transmitted over the air. Beacon
messages are messages sent in the first time slot of a second that
contain no payload. If a message with payload is sent during the
first time slot of a second, it is still used by OTA radios to
synchronize time but it is not included in this statistic.
Tx Payloads
R
The number of packets containing payload transmitted over the
air.
Tx Payload Bytes
R
The number of bytes for all packets containing payload
transmitted over the air.
Tx Configs
R
The number of STFP configuration messages processed by the
radio. STFP configuration messages are used to change the radio
receive and transmit frequencies.
Tx Dropped
R
The number of packets to be transmitted over the air that were
dropped by the radio before sending. There can be various
reasons for this. For example, an STFP message could not be
properly decoded by the radio, or a message could not be
transmitted because the radio is in an alarm state.
Tx Crc Errors
R
The number of packets to be transmitted over the air that were
dropped by the radio before sending because the STFP CRC did
not match.
Rx Beacons
R
The number of beacon messages received over the air. Beacon
messages are messages sent in the first time slot of a second that
contain no payload.
Rx Payloads
R
The number of packets containing payload received over the air.
Rx Payload Bytes
R
The number of bytes for all packets containing payload received
over the air.
Rx Errors
R
The number of packets received over the air for which the radio
detected an error that could not be compensated for using
forward error correction. This will match the number of STFP error
messages generated by the radio.
Rx Last RSSI
R
The RSSI of the last message received.
A) Clear Statistics
Reset all results to zero.
