GE MDS Mercury 3650, Reference Manual

Page: 98 / 211

05-4446A01, Rev. E Mercury Reference Manual 89
3.6.2 Menu Selections
Connect a PC to the transceiver as described in STEP 3: CONNECT PC
TO THE TRANSCEIVER section on Page 25 , and access the embedded
management system. Follow the steps below to proceed with
Modbus/TCP configuration.
1. From the Serial Configuration Wizard opening screen ( Figure 3-53
on Page 89 ), select
A
to begin the wizard.
Invisible place holder
Figure 3-53. Configuration Wizard Opening Screen
2. Choose the IP protocol you wish to use (TCP, UDP, or Mod-
bus/TCP) by selecting the appropriate letter from the menu.
Figure 3-54. IP Protocol Selection Screen
3. On the next screen ( Figure 3-55 on Page 90 ), choose the listening
port you wish to use for the Modbus/TCP server. The default is port
502
. Press
N
to continue.