Troubleshooting
Rotational Bracket Clearances
Symptom
Solution
Luminaire will not
turn on.
• Check that the color of the supply side wires match the color of the wires they are connected to.
•
Check that all wire connectors are properly connected.
•
Verify that your input voltage is within specs.
•
If you are using any additional controls (i.e. dimming wires, motion sensors), please also verify that those
are working properly and that the unit is setup to interface with the controllers.
Maintenance
• Product should not be disassembled during installation process and/or while installed.
• Lens should be cleaned periodically for maximum lumen output.
• Inspect and clear any build-up on cooling fins periodically for maximum performance.
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to
change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting is a business of the General Electric Company. © 2017 GE.
ALB019 (Rev 09/07/17)
10.9 in.
10.8 in.
15.5 in.
21.7 in.
