GE Interlogix Kalatel VDR User Manual Download Page 24

Page: 24 / 48

Kalatel VDR

3-2

0150-0255B

The Arrow Buttons

When in the Main Menu the Arrow buttons are used to navigate and modify field values.

Figure 3-1 The Arrow Buttons

Up Arrow Button

Left Arrow

Button

Right Arrow
Button

Down Arrow Button

The Main Menu

Time/Date

Alarms

Timer Settings

Record Settings

Display Settings

The Main menu provides access to all of the operator programmable
options. Each sub-section of the Main menu is described briefly in this
section.

For complete information about operator programming in the Main menu,
see section 4.

Advanced Menu

About

Main Menu

→

Advanced Menu

Password Box

Please Enter The Password!

---

To access the Advanced menu:

Select

ADVANCED MENU

from the Main menu, then

press the

Enter

button. The Password Box will

appear.

Enter the Advanced menu password. Use the

Arrow

buttons

to select a character, then use the

Enter

button to complete the selection, and move to the next
character.

Pressing the

Enter

button on the last character will

complete the password selection and the unit will
display the Advanced menu.

The Advanced Menu

Disk Overwrite Mode

Disk Maintenance

Auto Delete Mode

Adjust Picture

Front Panel Lock

Factory Settings

Change Password

Firmware Upgrade

For security reasons, a password is provided to limit access to the
Advanced menu. For instructions about entering the Advanced menu,
see

Main Menu

→

Advanced Menu

, on the previous page.

The Advanced menu provides access to all of the installer
programmable options. Each sub-section of the Advanced menu is
described briefly in this section.

For complete information about installer programming in the Advanced
menu, see section 5.

Summary of Contents for Kalatel VDR

















































Search results

Summary of Contents for Kalatel VDR

Reviews:

Related manuals for Kalatel VDR

Brands by name

Popular brands

GE Interlogix Kalatel VDR, User Manual

Search results

Summary of Contents for Kalatel VDR

Reviews:

Related manuals for Kalatel VDR

Brands by name

Popular brands