GE HEALTHCARE MAC 2000 Operator'S Manual Download Page 78

Page: 78 / 226

Recording a Resting ECG

Continue with step

Press

Cancel

to stop acquiring the ECG, and perform one of the following:

• Press

Yes

to stop acquiring the ECG data and return to the

Resting ECG

window.

• Press

to remain acquiring the ECG data, and continue with step

In the

Full Disclosure Report

window, you can perform the following operations:

Full Disclosure Report Window Field

Action

Export to SD Card

Press to export the ECG report to the SD
card.

Export to FTP Server

Press to export the ECG report to the
configured FTP Server.

See

“Communication Setup” on page 140

for detailed instruction on configuring the
FTP server.

Export to Shared Folder

Press to export the ECG report to the
configured Shared Folder.

See

“Communication Setup” on page 140

for detailed instruction on configuring the
Shared Folder.

Print

Press to print the ECG report to the
thermal printer.

Report Setup

Press to setup the full disclosure report.

See

“Full Disclosure Report Setup” on

page 79

for detailed instructions.

Return

Press and then the following message
displays:

The current full disclosure record will be
deleted. Do you want to continue?

• Press

Yes

to return to the Resting ECG

window.

• Press

to remain in the current full

disclosure report window.

MAC™ 2000

2053535-002K

Summary of Contents for MAC 2000


































































































































































































































Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands

GE HEALTHCARE MAC 2000, Operator'S Manual

Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands