GDS Compuprint 6214, User Manual

Page: 4 / 80

User Manual 6214
MAN10xxx-01 2
FCC COMPLIANCE STATEMENT FOR AMERICAN USERS
This equipment has been tested and found to comply with the limits for a CLASS A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at own
expense.
EMS AND EMI COMPLIANCE STATEMENT FOR EUROPEAN
USERS
This equipment has been tested and passed with the requirements relating to electromagnetic compatibility
based on the standards EN 55022:1998+A1:2000+A2:2003, CISPR 22, Class A EN
55024:1998+A1:2001+A2:2003, IEC 61000- 4 Series EN 61000-3-2 / 2000 & EN 61000-3-3 / 1995. The
equipment also tested and passed in accordance with the European Standard EN55022 for the both
Radiated and Conducted emissions limits.
6214 Thermal Label Printer
TO WHICH THIS DECLARATION RELATES
IS IN CONFORMITY WITH THE FOLLOWING STANDARDS
EN55022 : 1998, CLSPR 22, Class A / EN55024 : 1998 / IEC 61000-4 Serial / EN61000-3-2 : 2000 / EN
6100-3-3 : 1995 / CFR 47, Part 15/CISPR 22 3rd Edition : 1997, Class A / ANSI C63.4 : 2001 / CNS 13438 /
IEC60950-1 : 2005 (EN 60950-1 : 2006+A11 : 2009) / GB4943 : 2001 / GB9254 : 1998 / GB17625.1 : 2003 /
EN60950-1 : 2001
Caution

Danger of explosion if battery is incorrectly replaced. Replace only with the equivalent type
recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

Only use with designated power supply adapter model.

Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.