WAN CONFIGURATION:
This information is for the network on the ISP or DSL side of the router.
•
Select the WAN Tab;
•
Select the circuit type for your installation.
Multimode
T1.413
G.DMT
G.Lite
ADSL2
ADSL2+
ReADSL2
•
Select the Data Link Encapsulation for your installation
RFC1483
PPP
•
In the Circuit Name box fill in a name for your circuit
•
Enable your circuit by selecting YES from the dropdown menu
•
Select the Circuit VPI and VCI. The default numbers are typical for most
applications.
•
Select the Quality of Service (QoS) for your installation. UBR is typical.
•
Change Peak Cell Rate as required; 0 equals your Line Rate.
Click on the Save Change button. The software will restart
A YES/NO dialog will appear and it will tell you the router will reset if you select
YES.
Click on the Refresh Config button.
Verify the changes are complete.
13
