GDC LPU-1000 Installation Manual Download Page 53

Page: 53 / 86

5. INSTALLATION OF ENTERPRISE STORAGE/ ENTERPRISE STORAGE PLUS

INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT

-53-

26 Feb 2018

5.8 Indicators on the Enterprise Storage/Enterprise Storage Plus

5.8.1. LED Indicator

There are LED indicators on the front panel that show the status of the Enterprise Storage/ Enterprise Storage

Plus. Each drive has a corresponding LED light numbered 1-5.

The lights have 2 colors; blue and red. The LED lights can change from steady to flashing depending on the
status of the hard drive.

The table below describes the hard drive LED indicators.

HDD Status for

each numbered

drive

Blue

Red

HDD 1-5 LED

Steady

HDD is OK, powered

on.

•

Errors found on HDD.

•

Replace the
corresponding HDD.

Flashing

Read/Write

operations for normal

data access from

computer.

RAID is being rebuilt.

Off

No HDD connected

HDD not detected

Summary of Contents for LPU-1000























































































Search results

Summary of Contents for LPU-1000

Reviews:

Related manuals for LPU-1000

Brands by name

Popular brands

GDC LPU-1000, Installation Manual

Search results

Summary of Contents for LPU-1000

Reviews:

Related manuals for LPU-1000

Brands by name

Popular brands