24
5.
TROUBLESHOOTING
SYMPTOM
SOLUTION
My pager will not turn on.
Check that the battery is charged. Your
pager will operate as soon as the charger is
plugged in.
Some of my messages are corrupted.
If a message is corrupted, this usually means
that your pager is in a location with poor
coverage, typically indoors. The reason for
the error is because your pager was unable
to receive the message sent from the
satellite. If this is the case, your pager will
show a “?” alongside the message. If this
happens repeatedly, consider moving your
pager to a more exposed location or ask your
service provider about using an indoor signal
booster.
I’m n
ot receiving any messages.
There are 2 possible reasons for this:
1.
Poor coverage
–
typically seen when
using the pager indoors.
2.
Your pager has been incorrectly
programmed. If you suspect this, please
contact your service provider.
