![background image](http://html1.mh-extra.com/html/gcx/rs-0006-64/rs-0006-64_installation-manual_3907740004.webp)
DU-RS-0006-64 Rev B 3/28/14 GCX Corp Page 4 of 5
Attaching the Roll Stand Handle
1. Fasten Handle to Roll Stand Post with two (2) #10-32 x 9/16'' PHMS as shown.
Alternately tighten Handle screws until
Handle does not rotate around Post.
Installation Note:
Handle position shown is typical but Handle may be attached
at any desired location on the Post.
#10-32 x 9/16'' PHMS (2)