DU-FLP-0008-53 Rev C 03/28/16 GCX Corp Page 5 of 6
Operation of the Multi-Position Work-Surface
The work-surface can be positioned: over the keyboard, in
“music stand” position for documents, or all the way to the back
and flat for general tasks. To adjust, grab both sides and move to desired position.
To fold the keyboard tray, first position the work-surface over the keyboard, then fold the keyboard tray/work-surface tray
upward.
Adjusting Keyboard Tilt
The angle at which the keyboard tray sits when folded down for use can be adjusted between 0° and -10° from level. To
adjust the tilt angle, slightly raise the keyboard tray and then turn the Adjustment Knob, clockwise (CW) to decrease the
angle or counter-clockwise (CCW) to increase the angle. Lower the tray back down to verify the new tilt angle. Repeat
this process until the desired tilt angle is achieved.
Mouse Trays
There are two (2) mouse trays
– one on the left and one on the right side. To access, grab the lip of the tray and pull
outward.
