DU-FLP-0008-53 Rev C 03/28/16 GCX Corp Page 3 of 6
Attaching Key Board Tray to L- Bracket
1.
Slide Key Board Tray into L-
Bracket’s Hinge.
2.
Open lid on Key Board Tray and align holes, install (4) 10-32 x
5/16” FHMS using a phillips screwdriver (not provided)
Attaching Flat Panel Display
Installation Note:
To mount a display with 100 x 100mm pattern use VESA mounting adapter (included) install per
separately printed instructions.
1. Thread two (2) M4 x 10mm PHMS into the top two (2) threaded holes of the 75 x 75mm mounting pattern, leaving
4mm of thread exposed (approximately 6 full turns from tight).
2. Position the display onto the VESA Mounting Plate by guiding the screws into the slots in the top of the Mounting
Plate (below left). Thread two (2) M4 x 10mm PHMS screws into the lower mounting holes (below right). Tighten all
screws.
1
2
1
2
10-32 X
5/16”
